What are the methods of adjusting the wind knife? It is normal to say this. After all, the position of the wind knife cannot remain unchanged forever. Some manufacturers and companies want to install them through their own adjustment in order to be able to place them at the location or angle they want. So what are the mediation methods for wind knives? Wind knife manufacturer Ruitian has come to the following points:

1. Short axis horizontal adjustment

1. Use a vernier caliper to measure the safe distance between the entire axes on both sides of the air knife and the PVC board based on the PVC board under the air knife. Since the PVC board will have some errors during welding, it is necessary to ensure that the distance between the front and rear axes is consistent before proceeding with subsequent operations. Only the measured data will be used to adjust the height of the short axis.

2. Find a horizontal axis, take the axis on both sides of the air knife as the reference point, place the horizontal axis horizontally on the two reference points, and use the thickness gauge to adjust.

3. Find a PVC board or glass, and use the pivot centers on both sides of the air knife as the reference point. You can adjust it by placing the board on it.

2. Support wheel level adjustment

1. First lower all the support wheels to the lowest position, then take a piece of glass or PVC board and place it across the axes on both sides of the air knife. You must ensure that the glass or PVC is completely removed from the rollers on both sides before you can adjust the support wheels. .

3. Air knife angle and distance from glass

1. First tighten the screws for adjusting the height of the air knife, then loosen the angle-adjusting nuts on both sides of the air knife, and place the angle gauge on the air knife to adjust.

2. Upwind knife: 58°/122°, downwind knife: 120°/60°, distance between the upper and lower wind knives and the glass

3. Adjust the angle and lock the nuts on both sides, loosen the nuts for adjusting the height of the upper and lower air knives, and place glass with a thickness of 0.33mm on the upper and lower air knives.

4. The upwind knife is 5mm away from the glass, and the downwind knife is 4mm away from the glass.

The above points are the adjustment methods for air knives summarized by Dongguan air knife manufacturer Ruitian Electromechanical. We hope they can help users and enterprises in need. Ruitian is mainly engaged in processing customized and customized Retz high-speed products such as air knives, super fans, air knife drying systems, air knives, industrial air knives , stainless steel air knives , etc.