Lubrication is also called Minimal Quantity lubrication, Minimal Quantity Lubrication (MQL), and lubrication is a type of lubrication used in metal processing, i.e. semi-dry cutting. It refers to a cutting method in which compressed gas (air, nitrogen, carbon dioxide, etc.) is mixed with an extremely small amount of lubricating oil to form micron droplets, which are sprayed to the processing area for effective lubrication. The amount of cutting fluid is generally only 0.03 ~ 0.4L/h(the amount of traditional wet cutting is 20 ~ 100L/min), which can effectively reduce the friction between the tool and the workpiece, the tool and the chip, prevent bonding, extend the tool life, and improve the quality of the machining surface. The so-called low-temperature CA-MQL refers to the spray of cold air mixed with oil below 0 degrees, the cold air is more effective in cooling and cooling, and the oil mist increases the lubrication effect, so as to achieve the purpose of cooling and cooling lubrication, which can effectively reduce the temperature of the machining tool, and produce lubrication effect, improve the service life of the tool, increase the surface quality of the workpiece, and the dry cutting can be truly realized.
Lubrication is a type of lubrication used in metal processing, i.e. semi-dry cutting. Lubrication is...
More
Lubrication is a type of lubrication used in metal processing, i.e. semi-dry cutting. Lubrication is...
More
Lubrication is a type of lubrication used in metal processing, i.e. semi-dry cutting. Lubrication is...
More
Lubrication is a type of lubrication used in metal processing, i.e. semi-dry cutting. Lubrication is...
MoreTo provide you with professional solutions
