Xingrui ToolsThe air knife air knife is characterized by the formation of high-intensity impact airflow, which is used in air knife air knife water removal, dust removal, cleaning, drying, chip removal and chip blowing, cooling and cooling, etc.

It has the characteristics of high efficiency, low noise and low air consumption. Traditional air blowing application products have many disadvantages, such as uneven air flow and very large consumption of compressed air.

Although they have strong impact, the noise level is too high, which seriously affects the health of on-site operators; air blowing products powered by electricity often require frequent maintenance.

maintenance, and short service life.

Precautions:

1. First, you need to confirm the installation method of the air knife according to the design of the product or drying production line. Generally, there are horizontal installation or vertical installation, and there are also special diagonal installation methods.

2. Confirm the installation and fixation method of the air knife. Generally, the air knife has installation fixing bolts and air inlet fixation.

3. When installing the air knife, you need to consider that the air knife can be installed up and down, left and right, and at angles.

4. Confirm the pipe connection and fixation method of the air knife.

5. The most important thing is that the adjustment of the installation angle of the air knife is generally based on the product being blown, and is usually installed at 75° toward the direction of the incoming material.

6. If the product to be dried is a beverage bottle, it is generally installed on the side, with the incoming material placed in the direction of the front, low at the back, and high at the back.

7. The farther the distance between the air knife edge and the blow-drying product, the worse the air knife blow-drying effect. Therefore, we generally recommend that the closer the better, the best is to control the installation distance at 10-100mm. This needs to be determined according to the product and the air knife. System high-pressure fan selection and adjustment.